Exterior Lighting Control Panel
Overview:
Specifications:
Acollege sparkieapproachedemf to design and build a lighting controls enclosure in order to replace and upgrade an old,out-of-dateoutdoor lightingsystem.
The Solution:
Through our ADAPT team,wemanagedtomodernizethe previous system and meet the needs of a newly renovated block. Wedeveloped a Cubo O enclosurethat was weatherproof, impact-resistant, and had a light sensor toensure the lights turned on automatically at dusk.
Benefits:
IP65, NZ UV stable.
This system can be spliced into an existing lighting circuit without the need to rewire or reconfigure existing feeds in the switchboard. For example, on a 3 phase feed to carpark lighting system, this enclosure could be mounted on the first light in the circuit and control the rest of the carpark.
Other options can include:
- A single or 3 phase Isolator
- Up to 6 single-phase lighting circuits
- Manual override switch
- Integral daylight switch
- Lockable door options
Parts List :
- OPCP303013DS
- KY6 (lock)
- 1 x 63A Isolator
- 2 x 2 pole RCDs
- 1 xDaylight switch
- Earth/Neutral bar to suit
For any enquries about this switchboard, please use code: CS-63KC